1 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 1 inductors (coils) for power lines 2013.7.8 o this data sheet is applied for chip inductors (chip coils) used for general electronics equipment for your design. lqm2mpn_gh series 2016/0806 (mm/inch) general multi- layer 1.0 thickness mm max. low rdc bias reflow ok rohs c dimensions (in mm) 2.00.3 0.50.2 1.60.2 0.90.1 c packaging code packaging minimum quantity l ?180mm embossed taping 3000 c rated value ( p : packaging code) part number inductance inductance test frequency rated current (based on inductance change) rated current (based on temperature rise) dc resistance self resonance frequency (min.) lqm2mpnr16mgh p 0.16h ? 20% 1mhz 4.8a 4.0a 0.014
? 25% 150mhz lqm2mpnr24mgh p 0.24h ? 20% 1mhz 4.0a 3.4a 0.020
? 25% 130mhz lqm2mpnr33mgh p 0.33h ? 20% 1mhz 3.2a 3.1a 0.024
? 25% 90mhz lqm2mpnr47mgh p 0.47h ? 20% 1mhz 3.2a 2.5a 0.037
? 25% 80mhz lqm2mpnr68mgh p 0.68h ? 20% 1mhz 2.1a 1.9a 0.060
? 25% 60mhz lqm2mpn1r0mgh p 1.0h ? 20% 1mhz 1.6a 1.9a 0.064
? 25% 60mhz lqm2mpn1r5mgh p 1.5h ? 20% 1mhz 1.5a 1.5a 0.104
? 25% 50mhz lqm2mpn2r2mgh p 2.2h ? 20% 1mhz 1.0a 1.0a 0.210
? 25% 40mhz class of magnetic shield: magnetic shield of ferrite operating temperature range: -40 ? 85 ? only for re? ow soldering. c notice (rating) when applied rated current to the products, inductance will be within 30% of initial inductance value. when applied rated current to the products, self temperature rise shall be limited to 40c max. continued on the following page.
2 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 2 inductors (coils) for power lines 2013.7.8 o this data sheet is applied for chip inductors (chip coils) used for general electronics equipment for your design. continued from the preceding page. c inductance-frequency characteristics (typ.) 0.1 1 10 0.1 1 1000 100 10 frequency (mhz) l (h) 2.2h 1.5h 1.0h 0.68h 0.47h 0.33h 0.24h 0.16h c inductance-current characteristics (typ.) 0.1 1 10 1 10 10000 1000 100 current (ma) inductance (h) 2.2h 1.5h 1.0h 0.68h 0.47h 0.33h 0.24h 0.16h c temperature rise characteristics (typ.) current (ma) temperature (c) 50 40 30 20 10 45 35 25 15 5 0 0 1000 2000 3000 3500 4500 4000 500 1500 2500 1.5h 2.2h 1.0h 0.68h 0.47h 0.33h 0.24h 0.16h c ! caution/notice ! caution (rating) do not use products beyond the rated current as this may create excessive heat. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering pro? le where peak solder temperature is below the tin melting point is used. please con? rm the solderability of tin plating termination chip before use.
|
